high-precision optical switch d5f opto-mechanical switch achieves 1- m m operating position repeatability 4-way switch a knife-edge mechanism in the optical system provides greater precision for a more stable output reduced size and weight are 34 mm (1.34 in) at operating section and 60 g (2.12 oz) total actuators have wear-resistant ceramic parts pnp and npn output types available ordering information limit switches output configuration contact form output indicator cable length part number pnp open collector spst-nc on when no target present 1 m d5f-2b10 (+ common) g present 3 m d5f-2b30 npn open collector spst-no on when target present 1 m d5f-3c10 ( common) 3 m D5F-3C30
d5f d5f 2 c onstruction ????? ????? ????? ??? ??? ??????? ??????? ??????? ?? ?? ?? ?? ?? ?? ?? ?? ??? ??? ??? ??? ??? ?? ?? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ????? ????? ????? led indicator photodiode (for signal) ball lens o-ring seal rubber o ring seal cap ceramic chip photodiode (for monitoring) half mirror led light source specifications ratings power supply voltage 12/24 vdc 10% output current 100 ma max. power consumption 30 ma max. leakage current 0.15 ma max. residual voltage 2 v max.
d5f d5f 3 characteristics operating speed 1 m m/s to 50 cm/s (39 x 10 6 in to 19.68 in/s) max. operating frequency 60 operations/minute insulation resistance 100 m w min. (at 500 vdc) between each terminal and ground dielectric strength 1,100 vac between each terminal and ground repeat accuracy 1 m m max. (39 x 10 6 in) vibration resistance malfunction 10 to 500 hz, 0.65-mm double amplitude shock resistance malfunction 300 m/s 2 min. (approx. 30g min.) 984 ft/s 2 life expectancy mechanical 5,000,000 operations min. y electrical 5,000,000 operations min. deflection 10 m m max. after 1,000,000 operations (390 x 10 6 in) temperature coefficient 50 x 10 6 / c max. ambient temperature operating 10 c to 60 c (14 f to 140 f) with no icing ambient humidity operating 30% to 95% enclosure rating iec ip67 operating characteristics of max. 2.5 n (250 gf) (0.56 lbf) rf min. 1.0 n (100 gf) (0.22 lbf) pt max. 0.5 mm (0.22 in) md max. 20 m m (0.79 x 10 3 in) tt min. 2.2 mm (0.087 in) en g ineerin g data permissible operating temperature range the permissible operating temperature range varies with the current flow as follows: 100 50 40 20 40 45 60 current (ma) operating range operating temperature ( c)
d5f d5f 4 o peration output circuit d5f-2b 0 indicator (red led) brown black blue internal circuit output 12 to 24 vdc 0 v 100 ma max. actuator: on (press) off output transistor (load): on off indicator (led): lit not lit d5f-3c 0 indicator (red led) internal circuit brown black blue output 12 to 24 vdc 0 v 100 ma max. actuator: on (press) off output transistor (load): on off indicator (led): lit not lit
d5f d5f 5 dimensions unit: mm (inch) limit switches d5f-2b 0 d5f-3c 0 note: the degree of parallelism and squareness of the ceramic chip are 5 m m/5 mm against the reference plane. ?? ?? ?? ?? red led operation indicator 23 0.1 ceramic chip (measuring part) 16-head nut *1000 (3000) four, 4.5 dia. mounting holes 24 dia. (0.94) 34 (1.34) 15 (0.59) 16.5 (0.65) 14 (0.55) 34 (1.34) 30 (1.18) 30 (1.18) (0.91 0.004) 23 0.1 44.5 (1.75) 30 (1.18) 7 (0.27) 5 (0.19) 19.5 (0.77) 2 (0.79) 1.8 (0.71) 18 dia (0.71) 16 dia. (0.63) (0.91 0.004) precautions connecting take the residual voltage (2 v max.) into consideration when connecting a load or power supply. when the internal circuit of the switch is open, there is a current leakage of 0.15 ma max. and a residual voltage on the load. check the release voltage of the load before use. noise excessive external noise through the power line can affect the operating accuracy of the switch (refer to the table below). if required, use the correct noise filter to increase accuracy. level influence on accuracy 1 kv p-p 3 m m max. (0.118 x 10 3 in) 1.5 kv p-p 5 m m max. (0.196 x 10 3 in) operating do not press the plungers located opposite each other at the same time, or the switch could be damaged.
d5f d5f cat. no. cedsax3 10/99 specifications subject to change without notice. printed in u.s.a. omron electronics, inc. one east commerce drive schaumburg, il 60173 note: dimensions shown are in millimeters. to convert millimeters to inches divide by 25.4. 1-800-55-omron omron canada, inc. 885 milner avenue scarborough, ontario m1b 5v8 416-286-6465
|